17689 Coastal Hwy, Lewes, DE 19958 ~ 1-888-808-6104 ~ 302-645-7043 ~ firstname.lastname@example.org
Unfinished, Custom Finished, Hand Painted Real Wood Furniture
|Following are some tips for using our Mastercraft wood stains and paints/stains and EF water-based and Country Colors stains:
|EF Water-Based Stains and Country Colors
- Don't worry about grain raising -- Water-based products always raise the grain, but you'll still get a perfect finish by simply following the application instructions included with the stain.
- For a consistent stain on soft woods such as Aspen, use a pre-stain conditioner.
- Remove hardware from furniture.
- A second coat of stain will produce a darker color. Apply no more than 2 coats of stain.
- Don't be alarmed if red stains leave red pigment on your applicator. All red pigments lift off more than other pigments.
- Special Effects -- To obtain popular "Distressed Look", sand stain coat with #220 paper to reveal the original wood, sanding corners and edges that would normally get wear before applying top coat. For Washcoats using 2 colors, apply Wedgwood Blue and then immediately apply White, wiping the White into the Wedgwood Blue to achieve the desired look.
- Do not pour Top Coat on to project. Instead, dip the applicator into the can and apply it to the wood.
- Do not "work" or "scrub" top coats. Apply quickly and allow them to level out.
- Warming top coats in hot water makes them flow better for spraying.
- Maintenance -- Clean surface with damp cloth. Orange Oil or Lemon Oil may be used as a polish/cleaner. Do not used household cleaners or window cleaners. We recommend that you not use paste wax since it builds up and yellows.
- Other Information -- Clean up with soap and water. All products cover 150 square feet per quart. Do not allow to freeze in storage.
|Mastercraft Stains and Paint/Stain
- You can create pastel colors effortlessly by mixing 1/2 portions of Mastercraft paint/stain colors with 1/2 portion of MC41 Bleached White. Lighter or darker pastel shades can be achieved by increasing or decreasing the amount of Bleached White.
- To prevent stains from becoming absorbed too quickly into the end grains, mix 1 1/2 ounces of mineral spirits with 1/2 ounce of clear polyurethane and apply mixture with a 1" foam brush to the end grain areas immediately before applying the colored stain.
- To obtain a painted look using Mastercraft Paint/Stain colors, apply several coats of the base stain. One coat of the paint/stain color wiped off will allow the wood grain to show through and appear as if the finished unit was dyed.
- Sand your piece as smoothly as possible -- the smoother the surface, the more professional the result.
- Always sand with the grain and be careful around mouldings, turnings and end grains.
- Before sanding, test-color on an unexposed area such as the back of a drawer to be certain of the depth and shade.
- When applying clear top coats, remember that the more coats applied, the higher the final gloss and protection. Always use at least two clear coats.
FURNITURE GALLERY HOME PAGE
Bar Stools | Bed Room | Benches | Bookcases | Chairs | Chests | Desks | Country Charm
Corner Cupboards | Custom Designs | Entertainment Centers | Hutches | Juvenile | Kitchen Collection | Mirrors
Quilt Racks | Shelves | Tables | Wall Units | Finishes | Order Unfinished Furniture
Copyright© 1997-2003 Furniture Gallery
Web site designed and maintained by Beach-Net!